Further Diagnosis

Pinpoint Tests

Pin point tests, if used correctly, help to diagnose a fault in the system once a diagnostic trouble code has been stored.

Before Starting Pinpoint Tests:

  1. Delete the stored DTCs.
  2. Switch the ignition OFF and ON.
  3. Ride the motorcycle at a road speed in excess of 30 km/h. If the DTC is repeated, proceed to the relevant pinpoint test.

After Completion of Pinpoint Tests:

  1. Delete the stored DTCs.
  2. Switch the ignition OFF and ON.
  3. Ride the motorcycle at a road speed in excess of 30 km/h. If the DTC is repeated, proceed to the relevant pinpoint test.
  4. If a DTC is stored, there is a further fault. Read the stored DTC and refer to the relevant pinpoint test.