Odometer Reset

This model is equipped with an odometer that allows the recorded odometer value to be reset to zero during the PDI check.

In the event of replacement this functionality will also allow a new set of instruments to be programmed with the motorcycle’s existing odometer value.

note
Motorcycles with the odometer reset functionality enabled will display the Set/Reset Odometer option in the chassis diagnostics menu.If the odometer has recorded more than 120 miles (200 km) or previously been reset the option will not be available and the buttons will be greyed out.

Triumph Motorcycles LTD. would like to emphasise the importance of following the correct process whilst using the Triumph Diagnostic Tool to SET/RESET the odometer.

caution
This operation can only be performed once and cannot be undone.Check the new value is correct before proceeding.

When setting or resetting the odometer value ensure:

  • The CORRECT odometer value is displayed in the Set Odometer box before pressing the Set or Reset button.

  • DO NOT press the Set or Reset buttons before entering the correct odometer value. Once pressed the option to set or reset the odometer will no longer be available.

  • REMEMBER, pressing the set or reset buttons will lock the odometer and no further programming will be allowed.

odo_reset_4

To Set/Reset the Odometer always refer to Set/Reset Odometer in the Chassis Diagnostics chapter of the Triumph Diagnostic User Guide.