Crankcase Right Hand Cover - Removal
Warning - General - Stabilise Motorcycle - including DO NOT support on non integral parts
warning
Make sure the motorcycle is stabilised and adequately supported.Do not support the motorcycle on any ancillary component, the exhaust system or any other non structural parts of the motorcycle frame.A correctly supported motorcycle will help prevent it from falling.Failure to follow the advice above could result in serious injury or death.
Caution Engine Oil - Heat
caution
The engine oil may be hot.Avoid contact with the hot engine oil by wearing suitable protective clothing, gloves and eye protection.Contact with the hot engine oil may cause minor to moderate injury to exposed skin.
Warning - Engine Oil - Harmful to Humans
warning
Always wear suitable protective clothing and avoid skin contact with used engine oil.Prolonged or repeated contact with engine oil can lead to skin dryness, irritation and dermatitis.Used engine oil contains harmful contamination that can lead to skin cancer.Failure to follow the advice above could result in serious injury or death.
- Place an oil catch tray beneath the crankcase right hand cover to collect any oil that may spill out during removal.
- Release the eight fixings and remove the right hand crankcase cover. Discard the gasket.
Fixings
Copper washer
notice
Note the position of the copper washer for installation.
