Secondary Air Injection Reed Valves - Inspection

  1. Check for cracks, bending or other damage to the reed valves. Replace as necessary.
  2. Check for cracks or other damage to the reed valve limiting plates. Replace as necessary.
  3. Clean any carbon build up on the reed valve assemblies, reed valve cover and the camshaft cover.
  4. Check for damage to the seal areas on the reed valve assemblies. Replace as necessary.
  5. Make sure the reed valve limiting plates are fitted as shown in the illustration below.
    6. Reed valve inspection clcu

    1. Reed valve limiting plates

    2. Reed valves