Secondary Air Injection Reed Valves - Removal

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.

Perform the following operations

Perform the following operations:

Seat - Remove L Series

Battery - Remove L Series

Fuel Tank - Remove L Series

ABS Modulator - Removal LG1; LGX; LL1

SAI Valve - Removal L Series

  1. Release the spring clips and detach the secondary air injection feed hoses from the reed valves on the camshaft cover.
    2. note
    Note that the mounting bracket for the secondary air injection solenoid valve is secured by the fixings for the left hand reed valve cover. The ABS mounting bracket is secured by the fixings for the right hand reed valve cover.
  2. Release the bolts securing the valve covers to the camshaft cover.
    3. SAI Removal (ckuz)

    Harness shown removed for clarity

    1. Solenoid valve

    2. Reed valve cover fixings

    3. Solenoid valve bracket

    4. ABS modulator bracket

    5. Reed valve covers

  3. Ease the valve covers from the valves.
  4. Detach the valves from the camshaft cover.
    5. Remove reeds cdqz_2

    1. Reed valves