Secondary Air Injection Reed Valves - Installation

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
  1. Fit the reed valves to the camshaft cover.
    2. Remove reeds cdqz_2

    1. Reed valves

  2. Refit the valve covers, and the brackets for the secondary air injection solenoid and ABS modulator, as noted for removal. Tighten the fixings to 9 Nm.
    3. SAI Removal (ckuz)

    Harness shown removed for clarity

    1. Solenoid valve

    2. Reed valve cover fixings

    3. Solenoid valve bracket

    4. ABS modulator bracket

    5. Reed valve covers

  3. Refit the secondary air injection feed hoses to the reed valves.

Perform the following operations

Perform the following operations:

SAI Valve - Installation L Series

ABS Modulator - Installation LG1; LGX; LL1

Fuel Tank - Install L Series

Battery - Install L Series

Seat - Install L Series