Side Stand - Removal

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
  1. Raise and support the motorcycle.
    2. warning
    Wear hand, eye and face protection when unhooking the stand spring. Take great care to minimise the risk of personal injury and loss of components.
    note
    The side stand is held in the up position by spring tension.
  2. With the side stand in the up position, unhook the spring from the side stand and remove it from the motorcycle.
    3. Sidestand_1 (ckup)

    1. Pivot pin

    2. Circlip

    3. Spring

    4. Side stand

  3. Remove and discard the circlip securing the pivot pin.
  4. Remove the pivot pin and remove the side stand.