Radiator Cowl - Installation

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.

Rad Cowl Install LG1; LGX

  1. Clip the horn harness to the left hand side radiator cowl as noted during removal.
  2. Install the flanged sleeves to the radiator cowls as noted during removal and align the radiator cowl to the radiator.
    3. RadCowl_1 (ckvg)

    1. Radiator cowl (right hand side shown)

    2. Fixings

  3. Install two new fixings and tighten to 2.5 Nm.