Headlight Vertical Adjustment

Headlight Adjust LG1; LGX

note
Check and correct the tyre pressures prior to adjusting the headlight.
  1. Switch the headlight dipped beam on.
  2. Loosen the headlight pivot lock nut sufficiently to allow restricted movement of the headlight.
  3. Adjust the position of the headlight to give the required beam setting.
  4. Tighten the mounting fixings to 26 Nm.
  5. Recheck the headlight beam setting.
  6. Switch the headlight off when the beam setting is satisfactorily set.
    7. headlight fixing_1 (ckui)

    1. Headlight Assembly

    2. Pivot bolt