Front Direction Indicators - Installation

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.

Front Indicator Install LG1; LGX

  1. Install the direction indicator to the bracket and route the cable around the top of the bracket as noted during removal.
    2. Front Direction Indicator (cktm)

    Right hand direction indicator shown, left hand similar (upper yoke shown removed for clarity)

    1. Direction indicator cable

    2. Bracket

    3. Direction indicator

    4. Fork leg

  2. Install the direction indicator fixing but do not tighten.
  3. Raise the bracket up to align with the upper yoke and tighten the bracket fixing to 3 Nm.
  4. Tighten the direction indicator fixing to 3 Nm.
  5. Route the cable down to the electrical connectors as shown.
  6. Reconnect the electrical connectors.
    7. RH Direction Indicator Routing (cktv)

    Right hand direction indicator cable routing

    1. Fork leg

    2. Direction indicator cable

    3. Front brake hose

    4. Right hand switch housing cable

    5. Cable tie

    6. Rubber band

    7. Twist grip position sensor cable

    LH Direction Indicator Routing (cktp)

    Left hand direction indicator routing

    1. Fork leg

    2. Direction indicator cable

    3. Cable tie

    4. Instruments cable

    5. Left hand switch housing cable

    RH Direction Indicator Routing (cktu_1)

    Right hand direction indicator routing

    1. Rubber band

    2. Front brake hose

    3. Right hand switch housing cable

    4. Clutch cable

    5. Right hand direction indicator connectors

    6. Twist grip position sensor cable

    LH Direction Indicator Routing (ckto)

    Left hand direction indicator routing

    1. Headstock rubber guide

    2. Headlight cable

    3. Left hand switch housing cable

    4. Instruments cable

    5. Rubber band

    6. Left hand direction indicator connectors

Perform the following operations

Perform the following operations:

Battery - Install L Series

Seat - Install L Series

  • Check the operation of the direction indicators, rectify as necessary.