Ignition Switch - Installation

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.

Ignition Switch Install LG1; LGX

  1. Fit the ignition switch to the frame.
  2. Fit new shear bolts and tighten to 16 Nm.
    3. Ignition barrel_1 (ckuj)

    1. Shear bolts

    2. Ignition switch

  3. Reconnect the ignition switch electrical connector.
    4. Fuel Tank LH Connections (ckuc)

    1. Right hand switch housing connector

    2. Left hand switch housing connector

    3. Left hand switch housing connector

    4. Fuse box 2

    5. Ignition switch connector

Perform the following operations

Perform the following operations:

Fuel Tank - Install L Series

Battery - Install L Series

Seat - Install L Series