Throttle Body - Removal

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.

Perform the following operations

Perform the following operations:

Seat - Remove L Series

Battery - Remove L Series

Fuel Tank - Remove L Series

Airbox - Remove L Series

  1. Disconnect the throttle actuator motor multiplug.
    2. Throttle Body_1 (ckvx)

    1. Throttle body

    2. Throttle actuator motor multiplug

    3. Fixings

  2. Remove the four fixings and washers securing the throttle body to the inlet manifold and remove the throttle body.
  3. Remove and discard the inlet manifold seal.