Purge Control Valve - Removal

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.

Perform the following operations

Perform the following operations:

Seat - Remove L Series

Battery - Remove L Series

Side Panels - Removal LG1; LG2; LGX; LH2

note
Note the routing of the purge control valve fly lead for installation.Note the position of the purge control valve hoses for installation.

Purge Valve Remove LG1; LGX

  1. Disconnect the electrical connector from the purge control valve.
  2. Disconnect the evaporative canister hose and inlet manifold hose from the purge control valve.
  3. Remove the bracket fixing and remove the purge control valve and bracket from the inlet manifold.
    4. Purge Valve_1 (ckvw)

    1. Purge control valve electrical connector

    2. Purge control valve

    3. Bracket fixing

    4. Hoses

  4. If required, remove the fixing and separate the bracket from the purge valve.