Evaporative Canister - Removal

Warning - General - Fuel

warning
Observe the warning advice given in the General Information section on the safe handling of fuel and fuel containers. A fire, causing personal injury and damage to property could result from spilled fuel or fuel not handled or stored correctly.

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.

Perform the following operations

Perform the following operations:

Seat - Remove L Series

Battery - Remove L Series

Fuel Tank - Remove L Series

Airbox - Remove L Series

note
Note the position, orientation and routing of all hoses connected to the evaporative cannister for installation.

EVAP Canister Remove LG1; LGX

  1. Remove the fuel tank hose from the evaporative canister.
    2. EVAP Canister_2 (ckvu)

    1. Fuel tank hose

    2. Evaporative canister

  2. Remove and discard the cable tie securing the evaporative canister to the frame.
  3. Disconnect the purge valve hose and drain hose from the evaporative cannister.
    4. EVAP Canister_1 (ckvt)

    1. Evaporative canister

    2. Purge valve hose

    3. Drain hose

    4. Evaporative canister bracket

  4. Remove the evaporative canister from the grommet in the bracket.
  5. If required, remove the drain hose noting the routing for installation.