Rear Mudguard - Removal

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.

Perform the following operations

Perform the following operations:

Seat - Remove L Series

Battery - Remove L Series

  1. Remove the rear wheel spindle nut.
  2. Remove the fixings from the rear hanger cover.
    3. Read Mudguard Arm Cover (ckwg_2_1)

    1. Rear hanger cover

    2. Fixings

  3. Remove the lock nut and upper fixing and support the rear mudguard assembly. Collect the rear hanger cover and discard the lock nut.
    4. Rear Mudguard Inner Fixing_1 (ckwf_1)

    1. Fixing and lock nut (rear wheel removed for clarity)

  4. Cut the cable tie, disconnect the rear subharness and remove the rear mudguard assembly.
  5. If required, remove the rear direction indicators (see Rear Direction Indicators - Removal).
  6. If required, remove the rear licence plate light (see Rear Licence Plate Light - Removal).
  7. If the spray guard needs to be removed, first remove and discard the two rear fixings.
    8. Rear Mudguard Fixings_2_1 (ckwe)

    1. Fixings

  8. Remove the three underside fixings and remove the spray guard, collecting the indicator mounting bracket, indicator mount and three flanged sleeves.
  9. If required, remove the two fixings and remove the harness cover from the licence plate hanger arm, noting the routing of the rear subharness for installation.
    10. Rear Mudguard Fixings_1_1 (ckwd)

    1. Spray guard

    2. Fixings

    3. Harness cover

    4. Fixings