Handlebars - Removal

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
caution
To prevent paint damage, do not spill brake fluid onto any area of the bodywork or frame. Spilled brake fluid will damage paintwork.

Perform the following operations

Perform the following operations:

Seat - Remove L Series

Battery - Remove L Series

Mirrors - Remove L Series

Front Master Cylinder - Remove L Series

Handlebar End Weights - Removal L Series

Twist Grip - Removal L Series

  1. Release the fixings securing the right hand switch housing to the handlebar.
    2. RH Switch Housing LG1_1 (ckwr)

    1. Fixings

    2. Right hand switch housing

  2. Release the fixings and remove the clamp from the clutch lever assembly. Without disconnecting the clutch cable, lay the lever aside.
    3. Clutch Lever Fixings_1 (ckwj)

    1. Clutch lever

    2. Fixings

  3. Release the two fixings and remove the left hand grip from the handlebar. Collect the two washers.
    4. LH Grip (B01883)

    1. Fixing (one of two shown)

  4. Release the fixings securing the left hand switch housing to the handlebar.
    5. LH Switch Housing LG1_1 (ckwq)

    1. Left hand switch housing

    2. Fixings

  5. Support the handlebars and remove the handlebar clamp bolts.
    6. Handlebarclamp_1 (ckwp)

    1. Handlebar clamp

    2. Fixings

  6. Remove the clamp and the handlebars.