Drag Link and Rocker - Installation
Warning - General - Stabilise Motorcycle
warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
note
The fixings for the drag link and rocker are tightened during installation of the rear suspension unit. See Rear Suspension Unit - Installation.
- If required, refit the drag link and rocker centre fixing with a new lock nut. Do not tighten at this stage.
- Refit the drag link and rocker assembly to the swinging arm and secure with the rocker pivot fixing and a new lock nut. Do not tighten at this stage.
- Refit the drag link lower fixing with a new lock nut. Do not tighten at this stage.
|
Perform the following operations
Perform the following operations: