Rear Brake Pads - Inspection

  1. Check the friction material of each brake pad for signs of contamination and measure its thickness. If the friction material of either pad is contaminated or has worn beyond the service limit, renew both pads as a set.
    2. Rear Brake Pad Wear DV (L0225)

    1. Friction material thickness (service limit 1.5 mm)

    2. Brake pads

  2. Check the retaining pin. Renew any component which shows signs of damage or corrosion.
  3. Check the caliper body slides easily on the mounting bracket pins and check there is no sign of leakage from the piston seal. Rectify any problems before installing the brake pads.