Final Drive - Removal

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.

Perform the following operations

Perform the following operations:

Rear Wheel - Remove L Series

    caution
    Do not allow the wheel to rest on the brake disc, as this may damage the disc. Support the wheel on wooden blocks, equally spaced around the rim, such that the brake disc is raised above the ground.
  1. Place the wheel on wooden blocks with the drive sprocket uppermost.
  2. Gently lever the drive flange from the wheel hub.
    3. Final Drive Removal, cdxe_1

    1. Drive flange

  3. Remove the cush drive rubbers.
    4. Cush Drive, cdxg_1

    1. Cush drive