Engine Oil Type

Fully or semi synthetic 10W/40 or 10W/50 motorcycle engine oil which meets specification API SN (or higher) and JASO MA2. Triumph Performance fully synthetic engine oil is recommended

Engine Oil Capacity (Wet Fill Including Filter)

2.8 litres

Spark Plug Type

NGK CR9EK

Spark Plug Gap

0.60-0.75 mm

Coolant Type

Triumph D2053 OAT Coolant

Coolant Capacity

2.20 litres

Clutch Lever Free Play

2-3 mm

Valve Clearances - Inlet

0.10 - 0.20 mm

Valve Clearances - Exhaust

0.325 - 0.375 mm

Front Tyre Pressure

2.34 bar (34 lb/in²)

Rear Tyre Pressure

2.90 bar (42 lb/in²)

Fork Oil Grade

Showa SS47G

Fork Oil Level - Left Hand Fork

125 mm

Fork Oil Level - Right Hand Fork

115 mm

Fork Oil Volume - Left Hand Fork

560 cc

Fork Oil Volume - Right Hand Fork

475 cc

Front Fork Pull Through

39.50 mm +/- 0.5 mm

Front Brake Disc Maximum Run Out

0.25 mm

Rear Brake Disc Maximum Run Out

0.25 mm

Front Brake Disc Minimum Thickness

4.0 mm

Rear Brake Disc Minimum Thickness

5.0 mm

Brake Fluid Type

Triumph Performance DOT 4 brake fluid

Front Brake Pad Minimum Thickness

1.5 mm

Rear Brake Pad Minimum Thickness

1.5 mm

Drive Chain Type

DID520VM4

Drive Chain Play Measurement

43 - 55 mm

Drive Chain 20 Link Limit

319 mm

Drive Chain Lubrication

Triumph Performance chain lubricant

Bank Angle Indicator Service Limit

15 mm