Spark Plugs - Renew
Warning - General - Stabilise Motorcycle
warning
Make sure the motorcycle is stabilised and adequately supported.Do not support the motorcycle on any ancillary component, the exhaust system or any other non structural parts of the motorcycle frame.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall resulting in motorcycle damage, serious injury or death.
Perform the following operations
Perform the following operations:
Seat - Remove L Series
Battery - Remove L Series
Fuel Tank - Remove L Series
ABS Modulator - Removal LG1; LGX; LL1
Spark Plug Replace - LG1; LGX; LL1
- Detach the electrical connections from the ignition coils.
- Remove the ignition coils from the cylinder head.
- Using a suitable tool remove the spark plugs from the cylinder head.
- Fit new spark plugs and tighten to 12 Nm.
- Inspect the ignition coils seal for damage and replace if necessary.
- Refit the ignition coils and reconnect the ignition coils electrical connections.
- Install a flanged sleeve and new fixing and tighten to 9 Nm.
Perform the following operations
Perform the following operations: