Alternator Stator - Removal

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.

Perform the following operations

Perform the following operations:

Alternator Cover - Remove L Series

Alternator Stator and Rotor Note

note
If the alternator stator needs to be replaced, the crankshaft position sensor will also be replaced as they are one assembly.
    note
    Note the routing of the stator harness for installation.
  1. Remove and discard the fixings securing the crankshaft position sensor to the alternator cover.
  2. Remove and discard the fixing securing the cable bracket to the alternator cover.
  3. Remove and discard the fixings securing the stator to the alternator cover and remove the stator.
    4. Alt Stator LG1_1 (ckxv)

    1. Fixings

    2. Crankshaft position sensor

    3. Cable bracket

    4. Alternator stator