P1614 - Instrument ID incompatible Or Instruments Locked By Calibration Lock Function
P1614 - Instrument ID incompatible or Instruments locked by Calibration Lock function - Fault - CM8; CR8; CS8; DR5; DS5; HF8; HG8; HJ8; HK8; HL8; LG1; LGX; LJ2; LK2; LL1; PB1; PJ1; PJZ; PM1; PR1; PRB; PRC; PS1; PSB; PSC; PX1; PXB; PXC; PY1; PYB; PYC
Fault Code | Possible cause | Action |
|---|---|---|
P1614 | Instrument ID incompatible Instrument or calibration is incorrect, causing the engine ECM to be disabled to prevent the motorcycle from being operated | This is also identified by a fast flashing MIL indication and a disabled engine management system. |
Subheading - Pinpoint Test
Pinpoint Tests
P1614 - Instrument ID incompatible or Instruments locked by Calibration Lock function - Pinpoint Test - CM8; CR8; CS8; DR5; DS5; HF8; HG8; HJ8; HK8; HL8; LG1; LGX; LJ2; LK2; LL1; PB1; PJ1; PJZ; PM1; PR1; PRB; PRC; PS1; PSB; PSC; PX1; PXB; PXC; PY1; PYB; PYC
Test | Result | Action | |
|---|---|---|---|
1 | Check instrument part number is correct for the motorcycle | OK | Proceed to test 2 |
Faulty | Replace instrument with correct part and proceed to test 3 | ||
2 | Check that the calibration is correct for the motorcycle, using the diagnostic software | OK | Proceed to test 3 |
Faulty | Update the calibration using the diagnostic software, proceed to test 3 | ||
3 | Clear fault code, check for normal operation | OK | Action complete - quit test |
Short circuit | Contact Triumph service |