Intake Air Temperature Sensor - Removal

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.

Perform the following operations

Perform the following operations:

Seat - Remove L Series

Battery - Remove L Series

note
The intake air temperature sensor harness is identified by red tape.
  1. Press the wire locking device fully in and disconnect the harness from the intake air temperature sensor.
  2. Remove the intake air temperature sensor from the inlet manifold moulding.
    3. Air Temp Sensor LG1 (ckye)

    1. Intake air temperature sensor

    2. Electrical connector

    3. Red tape identifier