Manifold Absolute Pressure (MAP) Sensor - Installation

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
  1. Reconnect the MAP sensor multiplug.
  2. Refit the MAP sensor hose to the MAP sensor.
  3. Fit the sensor to the bracket, tightening the fixing to 5 Nm.
    4. MAP Sensor LG1 (ckyj)

    1. MAP sensor

    2. Fixing

Perform the following operations

Perform the following operations:

Fuel Tank - Install L Series

Battery - Install L Series

Seat - Install L Series