Gear Position Sensor - Removal

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.

Perform the following operations

Perform the following operations:

Seat - Remove L Series

Battery - Remove L Series

Front Sprocket Cover - Remove L Series

note
The gear position sensor electrical connection is situated in between the crankcase and the alternator regulator/rectifier.
  1. Disconnect the gear position sensor from the main harness.
  2. Remove the fixings and remove the gear position sensor.
    3. Gear Position Sensor LG1 (ckyi)

    1. Gear position sensor

    2. Fixings