Gear Position Sensor - Installation

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
  1. Refit the gear position sensor and tighten the fixings to 5 Nm.
  2. Gear Position Sensor LG1 (ckyi)
    1. Gear position sensor

    2. Fixings

    note
    The gear position sensor electrical connection is situated in between the crankcase and the alternator regulator/rectifier.
  3. Reconnect the gear position sensor to the main harness.

Perform the following operations

Perform the following operations:

Front Sprocket Cover - Install L Series

Battery - Install L Series

Seat - Install L Series