Fall Detection Switch - Removal

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.

Perform the following operations

Perform the following operations:

Seat - Remove L Series

Battery - Remove L Series

  1. Remove and discard the fixings securing the fall detection switch to the engine ECM tray.
  2. Disconnect the electrical connector and remove the fall detection switch.
    3. Fall Detect LG1 (ckyh)

    1. Fall detection switch

    2. Fixings

    3. Electrical connector