Fall Detection Switch - Installation

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
  1. Connect the electrical connector to the fall detection switch.
  2. Fit the fall detection switch to the engine ECM tray and tighten the new fixings to 3 Nm.
    3. Fall Detect LG1 (ckyh)

    1. Fall detection switch

    2. Fixings

    3. Electrical connector

Perform the following operations

Perform the following operations:

Battery - Install L Series

Seat - Install L Series