Balancer Cover - Removal

Warning - General - Stabilise Motorcycle

warning
Make sure the motorcycle is stabilised and adequately supported.Do not support the motorcycle on any ancillary component, the exhaust system or any other non structural parts of the motorcycle frame.A correctly supported motorcycle will help prevent it from falling.An unstable motorcycle may fall resulting in motorcycle damage, serious injury or death.

Caution Engine Oil - Heat

caution
The engine oil may be hot.Avoid contact with the hot engine oil by wearing suitable protective clothing, gloves and eye protection.Contact with the hot engine oil may cause minor to moderate injury to exposed skin.

Warning - Engine Oil - Harmful to Humans

warning
Always wear suitable protective clothing and avoid skin contact with used engine oil.Prolonged or repeated contact with engine oil can lead to skin dryness, irritation and dermatitis.Used engine oil contains harmful contamination that can lead to skin cancer.Failure to follow the advice above could result in serious injury or death.

Balancer Cover Remove LG1; LG2; LGX; LH2

  1. Place an oil catch tray beneath the balancer cover to collect any oil that may spill out on removal.
  2. Release the four fixings and remove the balancer cover. Discard the gasket.
  3. Balancer Cover (ckux_1)
    1. Fixings