Scheduled Maintenance Table
Operation Description | Odometer Reading in Miles (Km) or time period, whichever comes first | |||||
|---|---|---|---|---|---|---|
Every | First Service | Annual Service | Mileage Based Service | |||
600 (1000) six months | Year | 10,000 and 30,000 (16,000 and 48,000) | 20,000 (32,000) | 40,000 (64,000) | ||
Lubrication | ||||||
Engine and oil cooler - check for leaks | Day | • | • | • | • | • |
Engine oil - renew | - | • | • | • | • | • |
Engine oil filter - renew | - | • | • | • | • | • |
Fuel System and Engine Management | ||||||
Fuel system - check for leaks | Day | • | • | • | • | • |
Air filter - renew (replace more often if consistently riding in wet or dusty conditions) | - | - | - | • | • | • |
Spark plugs - renew | - | - | - | - | • | • |
Cooling System | ||||||
Cooling system - check for leaks | Day | • | • | • | • | • |
Coolant level - check/adjust | Day | • | • | • | • | • |
Cooling system - check coolant hoses for chafing, cracks or damage. Replace if necessary | - | • | • | • | • | • |
Coolant - renew - every 3 years, regardless of mileage* | Every 3 years, regardless of mileage | |||||
Engine | ||||||
Clutch - Check operation | Day | • | • | • | • | • |
Clutch cable - check function and adjust as necessary (models fitted with a cable clutch only) | Day | • | • | • | • | • |
Clutch lever pivot - clean/grease | - | - | • | • | • | • |
Valve clearances - check/adjust* | - | - | - | - | • | • |
Camshaft timing - check/adjust* | - | - | - | - | • | • |
Wheels and Tyres | ||||||
Wheels - inspect for damage | Day | • | • | • | • | • |
Tyre wear/tyre damage - check | Day | • | • | • | • | • |
Tyre pressures - check/adjust | Day | • | • | • | • | • |
Wheel bearings - check for wear/smooth operation | - | - | - | - | • | • |
Steering and Suspension | ||||||
Steering - check for free operation | Day | • | • | • | • | • |
Front and rear suspension - check for damage/leaks/smooth operation | Day | • | • | • | • | • |
Headstock bearings - check/adjust | - | - | - | - | • | • |
Rear suspension unit and linkage - lubricate (single rear suspension unit models only) | - | - | - | - | • | • |
Fork oil - renew | - | - | - | - | - | • |
Swinging arm spindle - lubricate | - | - | - | - | - | • |
Brakes | ||||||
Brake system - check operation | Day | • | • | • | • | • |
Brake pads - check wear levels* | Day | • | • | • | • | • |
Brake fluid levels - check | Day | • | • | • | • | • |
Brake fluid - renew - every 2 years, regardless of mileage* | Every 2 years, regardless of mileage | |||||
Final Drive | ||||||
Drive chain slack - check/adjust | Day | • | • | • | • | • |
Drive chain rubbing strip - check for wear, cracks or damage* | - | • | • | • | • | • |
Drive chain - wear check* | - | • | • | • | • | • |
Drive chain - lubricate | - | • | • | • | • | • |
Electrical | ||||||
Lights, instruments and electrical systems - check/adjust | Day | • | • | • | • | • |
General | ||||||
Bank angle indicators - check for wear* | Day | • | • | • | • | • |
Centre and/or side stand - check for wear/smooth operation | Day | • | • | • | • | • |
Instruments and engine ECM - check for latest calibration download using the Triumph diagnostic tool | - | • | • | • | • | • |
Autoscan - carry out a full Autoscan using the Triumph diagnostic tool (print a customer copy) | - | • | • | • | • | • |
Carry out all outstanding Service Bulletin and warranty work | - | • | • | • | • | • |
Carry out road test | - | • | • | • | • | • |
Complete the service record book and reset the service indicator (if fitted) | - | • | • | • | • | • |