Final Drive Chain Guard - Removal

Warning - General - Stabilise Motorcycle - including DO NOT support on non integral parts

warning
Make sure the motorcycle is stabilised and adequately supported.Do not support the motorcycle on any ancillary component, the exhaust system or any other non structural parts of the motorcycle frame.A correctly supported motorcycle will help prevent it from falling.Failure to follow the advice above could result in serious injury or death.
  1. Remove the two fixings securing the rear hugger and chain guard to the swingarm.
  2. Manoeuvre the rear hugger and chain guard rearwards to detach the two locating slots from the retaining grommets.
    3. Final Drive Chain Guard_TP0416

    1. Rear hugger and chain guard

    2. Fixing (left hand side)

    3. Fixing location (right hand side)

    4. Retaining tangs

    5. Retaining grommet (left hand side)